Table of Contents
Advertisement
6.7
Connections for gas / electrical installation
Terminal block
12VDC permanent connection
Terminal block
12VDC heating element
Gas valve
connection gas supply
Terminal block
12V DC conn. power module
and D+
Gas installation
6.8
The rules in point 6.1 must be adhered to.
Ÿ Ÿ
When running on gas, these appliances are intended exclusively to use
Ÿ Ÿ
liquid gas (propane/butane) - under no circumstances should town gas or
natural gas be used (EN 27418).
A fixed, pre-set pressure regulator complying with EN 12864 must be
Ÿ Ÿ
connected to the liquid gas cylinder.
The pressure regulator must concur with the operating pressure specified
Ÿ Ÿ
on the data plate of the appliance. The operating pressure corresponds to
the standard pressure of the country of specification (EN 1949, EN 732).
Only one connection pressure is permissible for any one vehicle. A plate
Ÿ Ÿ
showing the permanent, clearly legible notice must be displayed in full view
at the point where the gas cylinder is installed.
The gas connection to the appliance must be installed securely and at
Ÿ Ÿ
zero potential using tube connectors and must be securely connected to the
vehicle (a hose connection is not permissible) (EN 1949) .
input
23
Hide quick links:
Advertisement
Table of Contents
