Table of Contents
Advertisement
Username password
Username: 16 characters (a~z, A~Z, 0~9)
Confirm Password: password confirmed
Password: 16 characters (a~z, A~Z, 0~9)
System time
Network Time Server: time server select
Time Zone: time zone select
System idle time
System idle time: default 20min (1 to 1000min)
Reboot
Reboot: system reboot
PBX Configuration
IPX-1000 comes standard with 2 CO lines and 4 extension lines. Basically any analog telephones can
be used, but it is better to use telephones with a "Flash" key which generates hook flashes within the
range of 100 ~ 700 milliseconds. The Flash key is used in many operations such as transferring a call.
Although you can flash the hook manually without using the Flash key, it will be quite inconvenient and
subject to timing errors.
Please select the PBX configuration icon:
Password
Call ID (Caller ID Pass
Through)
Ring To Answer
Parameter Description
This is the password used to login the system.
Please clicking on the box to enable Caller ID Pass Through - a check mark
will appear in the box. If Caller ID Pass Through is enabled, the system will
pass caller ID information through to the extensions. Otherwise, it will not.
Clicking on the box again to disable Caller ID Pass Through – the check mark
will disappear from the box.
Number of rings the system will wait before answering incoming calls.
43
Advertisement
Table of Contents
