Help Function - Planet XGS3-42000R User Manual

Left "←"
Right "→"
Ctrl +p
Ctrl +n
Ctrl +b
Ctrl +f
Ctrl +z
Ctrl +c
Tab

3.2.4 Help Function

There are two ways in Chassis Switch for the user to access help information: the "help" command and the
"?".
Acce ss to Help
Help
"?"
The cursor moves one character to
the left.
The cursor moves one character to
the right.
The same as Up key "↑".
The same as Down key " ↓ ".
The same as Left key "←".
The same as Right key "→".
Return to the A dmin Mode directly from the other configuration modes
(except User Mode).
Break the ongoing command process, such as ping or other command
execution.
When a string for a command or key word is entered, the Tab can be
used to complet e the command or keyword if there is no conflict.
Usage and function
Under any command line prompt, type in "help" and press Enter will get a
brief description of the associated help system.
1． Under any command line prompt, enter "?" to get a command list of
the current mode and related brief description.
2． Enter a "?" after the command keyword with a embedded space. If the
position should be a parameter, a description of that parameter type,
scope, etc, will be returned; if the position should be a keyword, then a
set of keywords with brief description will be returned; if the output is
"<cr>", then the command is complet e, press Enter to run the
command.
3． A "?" immediately following a string. This will display all the commands
that begin with that string.
You can use the Left and
Right key to modify an
entered command.
3-37