Help Utility - Planet GSD-800S User Manual

If you are at group level, the prompt will display the actual group, e.g.
System>
At group level you also have the option of using the slash (/) key to refer to a context
relative to the top level. E.g. you may be in the system group and enter a /console
command into the console group.
3.2.2 Login/Logout Procedures
To get access to the CLI you must login by entering a password. You will automatically
be queried about the password. The password is configurable. The password check may
be disabled by setting the password to an empty string
entered during login will be accepted.
You may logout at any time and at any context level using the exit command.

3.2.3 Help Utility

You may get help by pressing the ? key or entering help. The help info depends on the
context:
● At top level, a list of command groups is displayed.
● At group level, a list of the command syntaxes for the current group is dis-
played.
● If the help command is issued for a specific command, the command syntax
and a description of the command are shown.
3.2.4 Example
The command hierarchy and the help utility is demonstrated in the following example:
> ? <enter>
Commands at top level:
System – System commands
Console – Console commands
Port – Port commands
MAC - MAC table commands
VLAN – VLAN commands
Aggregation – Aggregation/Trunking commands
QoS – QoS commands
Mirror – Mirror commands
IP – IP commands
10
, in which case any password