Typical Vlan Application - Planet XGS3-42000R User Manual

private-vlan {primary | isolated |
community}
no private-vlan
10. Set Private VLAN association
VLAN mode
private-vlan association
<secondary-vl an-li st>
no private-vlan association

14.1.3 Typical VLAN Application

Scenario:
VLAN2
PC
VLAN2
The existing LAN is required to be partitioned to 3 VLANs due to security and application requirements. The
three VLA Ns are VLAN2, VLAN100 and VLA N200. Those three VLA Ns are cross two different location A and
B. One switch is placed in each site, and cross-location requirement can be met if VLA N traffic can be
transferred between the two switches.
Configuration Item
VLAN2
VLAN100
VLAN200
Trunk port
Command
PC Workstation
PC
PC
Workstation
Figure 14-1-2 Typical VLA N Application Topology
Configuration description
Site A and site B switch port 2 -4.
Site A and site B switch port 5 -7.
Site A and site B switch port 8 -10.
Site A and site B switch port 11.
Configure current VLA N to Private VLA N.
The no command deletes private VLA N.
Set/delete Private VLA N association.
VLAN100
Workstation PC
Switch A
Trunk Link
Switch B
PC
VLAN100
Workstation
14-4
Explanation
VLAN200
PC
PC
VLAN200