TRENDnet TV-IP662PI User Manual page 48

TRENDnet User's Guide
3. Enable DDNS, fill out the following information and then click Apply.
4. Go to Virtual Server* section and create a new entry.
Enable: Click Enable
Name: Enter the application name (eg. Camera Name)
Protocol: Select TCP
Private Port: The HTTP port that you assign on your Camera.
Public Port: The port used on remote side to access to your Camera.
LAN Server: The local IP address of your Camera.
Click Add to add the application.
* Please refer to your router's user's manual for detail Virtual Server setting.
Some router might use Port Forwarding or Special applications for this
© Copyright 2014 TRENDnet. All Rights Reserved.
function. The setup steps should be very similar.
5. Open another web browser and enter your DDNS domain and camera's port
number.
http://yourDomainName:PortNumber
6. The camera login page will appear.
TV-IP662PI
47