Installation - For The Configuration W/ Extended Cables 9; Hardware Installation - Vivotek SD8364E/ -M User Manual

Installation - for the Configuration w/ Ex-
tended Cables

Hardware Installation

IMPORTANT:
The SD8364E series comes with or without the extended Ethernet and IO combo cables.
Different configurations come with different ordering numbers. Therefore, the installation
procedure can differ, and the procedures are separately described as follows.
IMPORTANT:
If your camera comes without the dehumidifier, you
should examine whether the color of the silica gel
inside the chassis has turned dark. If so, you should
replace the desiccant bag.
To replace the desiccant bags:
1. Remove the dome cover by loosening 4 T25
anti-tamper screws.
2. Replace the desiccant bags by attaching them
firmly to the inside of the chassis.
3. Re-install the dome cover.
Also note the following:
1. Do not install the camera in a raining day.
2. It takes approximately 2 days to suppress the
moisture level to 30% or lower, either using the
desiccant bags or the dehumidifier.
3. Condensation may still be observed from on the
dome cover within 30 minutes.
VIVOTEK
User's Manual - 9