Table of Contents
Advertisement
type
lan,
pppoe
<product
dependent>
resetip
<boolean>
ipaddress
<ip
address>
subnet
<ip
address>
router
<ip
address>
dns1
<ip
address>
dns2
<ip
address>
wins1
<ip
address>
wins2
<ip
address>
lan
6/6
1
6/6
<product
6/6
dependent>
<blank>
6/6
<blank>
6/6
<blank>
6/6
<blank>
6/6
<blank>
6/6
<blank>
6/6
To stop service before changing its port settings.
It's recommended to set this parameter when
change a service port to the port occupied by
another service currently. Otherwise, the service
may fail.
Stopped service will auto-start after changing port
settings.
Ex:
Change HTTP port from 80 to 5556, and change
RTP port for video from 5556 to 20480.
Then, set preprocess=9 to stop both service first.
"/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_port=555
6& network_rtp_videoport=20480"
Network connection type.
1 => Get ipaddress, subnet, router, dns1, dns2
from DHCP server at next reboot.
0 => Use preset ipaddress, subnet, rounter, dns1,
and dns2.
IP address of server.
Subnet mask.
Default gateway.
Primary DNS server.
Secondary DNS server.
Primary WINS server.
Secondary WINS server.
VIVOTEK
User's Manual - 147
Advertisement
Table of Contents
