Wireless Connection: Manual Configuration - Vivotek IP8130W User Manual

VIVOTEK

Wireless Connection: Manual Configuration

1. In addition to the use of WPS function, you can also use a wired connection to manually
set up your wireless configuration.
2� Enter the Configuration > Wireless > WLAN page� Key in the same wireless settings
as those on your router/AP (SSID, Encryption type, and Pre-shared key).
3. When done, click the Save button, disconnect the Ethernet cable and then reboot the
camera (by disconnect and then connect the power cord)� The camera should then be
connected over the wireless network. If successfully configured, the camera LED should
turn Green after 1 minute. If the camera LED does not turn Green within 2 minutes,
check your wireless configuration for errors.
20 - User's Manual