Table of Contents
Advertisement
Installation - for the Configuration w/o Ex-
tended Cables
Hardware Installation
1. Connecting RJ45 Ethernet Cable
RJ45 Cable Dimension (unit: mm)
Use CAT5e cables only.
Assembling Steps
Prepare an Ethernet cable
1
and strip part of the sheath.
Recommended cable gauge: O.D. 5.5~7
Insert the stripped Ethernet
4
cable through the sealing nut
and the housing.
(A)
Attach the gasket to the
7
front of the housing.
100
Insert the housing into the
2
screw nut.
(C)
Clamp the cable with
5
an RJ45 plug.
Connect the Ethernet cable to the RJ45 cable and secure
8
the connectors tightly.
(E)
Components of the Waterproof
Connector
Sealing Nut (A)
Insert the seal into the hous-
3
ing.
(D)
(B)
Push the RJ45 plug into
6
the housing, then secure
the sealing nut tightly.
VIVOTEK
Seal (B)
Screw Nut (C)
Housing (D)
Gasket (E)
User's Manual - 13
Advertisement
Table of Contents
