Obtain Configuration Information - SonicWALL TZ 180 Getting Started Manual

Obtain Configuration Information

Record and keep for future reference the following setup information:
Registration Information
Serial Number:
Authentication Code:
Networking Information
LAN IP Address:
. .
Subnet Mask:
. .
Ethernet WAN IP Address:
. .
Administrator Information
Admin Name:
Admin Password:
Page 8 Obtain Configuration Information
Record the serial number found on the bottom panel of
your SonicWALL appliance.
Record the authentication code found on the bottom panel
of your SonicWALL appliance.
Select a static IP address for your SonicWALL appliance
that is within the range of your local subnet. If you are
unsure, you can use the default IP address
. (192.168.168.168).
Record the subnet mask for the local subnet where you are
installing your SonicWALL appliance.
.
Select a static IP address for your Ethernet WAN. This
setting only applies if you are already using an ISP that
. assigns a static IP address.
Select an administrator account name.
(default is admin)
Select an administrator password.
(default is password)