Obtain Configuration Information - SonicWALL NSA E7500 Getting Started Manual

Network security appliance
Hide thumbs Also See for NSA E7500:
Table of Contents

Advertisement

Obtain Configuration Information

Please record and keep for future reference the following setup
information:
Registration Information
Serial Number:
Record the serial number found on the
bottom panel of your SonicWALL
appliance.
Authentication Code:
Record the authentication code found on
the bottom panel of your SonicWALL
appliance.
Networking Information
LAN IP Address:
Select a static IP address for your
SonicWALL appliance that is within the
range of your local subnet. If you are
.
.
.
unsure, you can use the default IP
address (192.168.168.168).
Subnet Mask:
Record the subnet mask for the local
subnet where you are installing your
SonicWALL appliance.
.
.
.
Ethernet WAN IP
Select a static IP address for your
Address:
Ethernet WAN. This setting only applies
if you are already using an ISP that
.
.
.
assigns a static IP address.
Administrator Information
Admin Name:
Select an administrator account name.
(default is admin)
Admin Password:
Select an administrator password.
(default is password)
Obtain Internet Service Provider (ISP) Information
Record the following information about your current Internet service:
If You connect
Please record
using
DHCP
No information is usually required: Some providers
may require a Host name:
Static IP
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
DNS 2 (optional):
DNS 3 (optional):
Note:
If you are not using one of the network configurations
above, refer to the SonicOS Enhanced Administrator's
Guide <http://www.sonicwall.com/us/support.html>.
SonicWALL NSA E7500 Getting Started Guide
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Page 5

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

E7500

Table of Contents