System Requirements; Recording Configuration Information - SonicWALL TZ 100 Series Getting Started Manual

System Requirements

Before you begin the setup process, verify that you have:
• An Internet connection
• A Web browser supporting Java Script and HTTP uploads.
Supported browsers include the following:
Supported Browsers
Internet Explorer
Firefox
Netscape
Opera
Safari
Page 2 System Requirements
Browser Version
Number
6.0 or higher
2.0 or higher
9.0 or higher
9.10 or higher
for Windows
2.0 or higher
for MacOS

Recording Configuration Information

Record the following setup information to use during the setup
process and for future reference:
Registration Information
Serial Number:
Authentication Code:
Networking Information
LAN IP Address:
. . .
Subnet Mask:
. . .
Ethernet WAN IP Address:
. . .
Administrator Information
Admin Name:
Admin Password:
Record the serial number found on the
bottom panel of your SonicWALL
appliance.
Record the authentication code found on
the bottom panel of your SonicWALL
appliance.
Select a static IP address for your
SonicWALL appliance that is within the
range of your local subnet. If you are
unsure, you can use the default IP
address (192.168.168.168).
Record the subnet mask for the local
subnet where you are installing your
SonicWALL appliance.
Select a static IP address for your
Ethernet WAN. This setting only applies if
you are already using an ISP that assigns
a static IP address.
Select an administrator account name.
(default is admin)
Select an administrator password.
(default is password)