SCSI Connections
This appendix provides information about connecting Small Computer Sys-
tem Interface (SCSI) devices to an HP 9000 B132L/
workstation. It presents the information in the following sections:
•
•
•
•
•
NOTICES
When attaching external SCSI devices, be sure to terminate the last device
on the external SCSI bus.
If no external devices are connected to the external SCSI connectors on the
rear panel of the workstation, a SCSI terminator must be installed.
172
SCSI bus differences
SCSI restrictions
Determining SCSI bus length
Assigning SCSI device IDs
Connecting to the SCSI ports
B160L/180L
B132L+/