Roland V-800HD Owner's Manual page 57

AUX Output of the Input Signal
• You can directly send the input channel signal to the AUX bus. However, you cannot use DSK while you are selecting input
signal
• Use menu to select the channel to be sent to AUX bus.
Menu Items
Output -> AUX Source
Selection of the Recalling Parameter
• You can select the parameters to recall when you operate the MEMORY buttons.
Menu Items
System -> Memory Recall Parameters
Automatic Memory Save
• If this is turned on, the current status of the V-800HD is saved to memory 1-1 automatically. The status is loaded at next booting
and the status returns.
Menu Items
System -> Auto Memory
• The auto saving is carried out when you operate any menu cursor. Auto saving does not work when cross-point buttons or
video fader is operated.
Expanded Color Correction Range
• The range of color correction is expanded.
Menu Items
Output -> Format Main -> Color Correction
Brightness
Contrast
Saturation
Fine Adjustment of Chroma Key HUE
• The extraction color was fixed to blue or green in previous version. Now it's possible to fine adjust the color.
Menu Items
Key -> Hue
Fine
Width
• Width is same as Hue adjustment of previous version.
Setting Value
Mixer Input, Mixer Output, DSK Source,
DSK Output, Input CH.1, ... Input CH.10
Setting Value Explanation
This recalls all the parameters (same as
ALL
previous version)
This recalls the parameters below only.
- Channel selection
- Key setup
Cross-point - PinP setup
- DSK setup
- Wipe setup
- Input connector selection
Setting Value
ON, OFF
Setting Value
-128 - +127
-128 - +127
-128 - +127
Setting Value
-128 - +127
-128 - +127
V-800HD Version 1.50 Added Functions
57