Roland V-800HD Owner's Manual page 27

Changing the Format of the Main Output
This changes the output format of the SDI OUT connectors and DVI-D/HDMI OUT connectors. This setting is shown by the
[OUTPUT FORMAT] indicators.
1.
Display the Output menu.
Press the [MENU] button to display the menu. Use the [CURSOR] buttons to select [Output], then press the [ENTER] button to
display the Output menu.
fig.open-output-menu.eps
2.
Select the main output.
Use the [CURSOR] buttons to go to [Format] and select the [Main] format display area, then use the [VALUE] dial to change the
format.
fig.change-format.eps
3.
Exit the menu.
Press the [EXIT] button several times to quit the menu.
fig.close-menu.eps
Selecting the Output Format
27