INSTALL USING LATCH
1
Locate the LATCH Connector Storage compartments. Remove LATCH
straps. Make sure
and LATCH Adjuster strap (Pull 1 st ) are loosened to their full length.
Grab both ends of LATCH straps. Slide LATCH strap to blue
2
REAR-FACING
Storage compartments must be open and both LATCH straps must be
loosened to their full length in order to slide LATCH straps into
position.
3
Close both LATCH Connector Storage compartments.
belt path ALWAYS keep LATCH Connector Storage
compartments closed.
42
SuperCinch
opening on both sides. Note: Both LATCH Connector
When not accessing the LATCH or changing the
LATCH Tightener strap (Pull 2 nd )
™