Rear-Facing Setup; Install Using Latch - Chicco NextFit User Manual

INSTALL USING LATCH

1 Locate the LATCH Connector Storage compartments. Remove LATCH
SuperCinch
straps. Make sure
and LATCH Adjuster strap (Pull 1 st ) are loosened to their full length.
Grab both ends of LATCH straps. Slide LATCH strap to blue
2
REAR-FACING opening on both sides. Note: Both LATCH Connector
Storage compartments must be open and both LATCH straps must be
loosened to their full length in order to slide LATCH straps into
position.
3 Close both LATCH Connector Storage compartments.
When not accessing the LATCH or changing the
belt path ALWAYS keep LATCH Connector Storage
compartments closed.
42
LATCH Tightener strap (Pull 2 nd )
™
Make sure LATCH
Adjuster strap (Pull 1 st )
1
is loosened to the full
length.
2
INSTALL USING LATCH
Make sure SuperCinch ™
LATCH Tightener strap
(Pull 2 nd ) is loosened to
the full length.
3
43