Latch Removal & Storage; Shoulder Belt Lockoff - Chicco KeyFit 30 User Manual

LATCH REMOVAL & STORAGE
This Child Restraint can be safely installed using vehicle
belts or LATCH. LATCH is a Child Restraint attachment
system that is standard in most vehicles manufactured
after September 1, 2002. Refer to your vehicle owner's
manual for details regarding LATCH use in your vehicle.
Removing LATCH:
Pull LATCH Connectors out of
1
storage pockets while lifting up on
LATCH Release Lever.
Storing LATCH:
Insert LATCH Connectors into
2
storage pockets.
Pull LATCH Pull Strap to
3
secure LATCH Connectors.
Roll LATCH Pull Strap and
4
store in Pull Strap Storage Pocket.
When not using LATCH, the LATCH Connectors and Pull Strap
MUST be stored properly to allow Carrier to attach securely to
Base.
1
2
3
4
14

SHOULDER BELT LOCKOFF

The Shoulder Belt Lockoff is used when installing the Base using
your vehicle belts. It locks the vehicle shoulder belt in place,
ensuring a stable, secure Base installation.
Do not put the shoulder belt in
the locked mode before installing
and using the Shoulder Belt
Lockoff.
With vehicle belt tight,
1
position the shoulder belt under
the Shoulder Belt Lockoff that is
on the opposite side of the buckle.
Do not pull belt to tighten when
belt is in the Shoulder Belt Lockoff.
Applying too much pressure to the
Lockoff can damage it.
Firmly slide shoulder belt into
2
the lockoff.
(Optional: Once the base is installed
tightly, the shoulder belt can be put in
the locked mode. See vehicle owner's
manual or label on seat belt for more
information.)
Refer to "Installation Using
Vehicle Belt" on page 32 for
detailed installation instructions.
1
2
15