4.
Remove the fan (4).
Reverse this procedure to install the fan.
Heat sink
Description
Heat sink (includes replacement thermal material)
Before removing the heat sink, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery.
6.
Remove the fan (see
46
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Fan on page
45).
28).
Spare part number
755728-001