Table of Contents
Advertisement
Main Menu
Table of Contents
U.S.
Canada
Parking Brake and Brake System
Indicator
This indicator has two functions:
1.
This indicator comes on when you
turn the ignition switch to ON (II).
It is a reminder to check the
parking brake. A beeper sounds if
you try to drive with the parking
brake not fully released. Driving
with the parking brake not fully
released can damage the brakes
and tires.
2.
If it remains on after you fully
release the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page
244
.
Anti-lock Brake System
(ABS) Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II), and when
the ignition switch is turned to
START (III). If it comes on at any
other time, there is a problem in the
ABS. If this happens, have your
vehicle checked by your Acura
dealer. With this indicator on, your
vehicle still has normal braking
ability but no anti-lock. For more
information, see page
181
Instrument Panel Indicators
Immobilizer System
Indicator
This indicator comes on for a few
seconds when you turn the ignition
switch to ON (II). It will go off if you
have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page
78
).
This indicator also blinks several
times when you turn the ignition
.
switch from ON (II) to ACCESSORY
(I) or LOCK (0).
Instruments and Controls
59
Advertisement
Chapters
Table of Contents
