Acura 2004 MDX Owner's Manual page 238

Main Menu Table of Contents
Changing a Flat Tire
JACKING POINT
12. Place the jack under the jacking
point nearest the tire you need to
change. It is pointed to by a
mark molded into the underside of
the body. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
234
Taking Care of the Unexpected
EXTENSION
WHEEL WRENCH
13. Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground.
14. Remove the wheel nuts, then
remove the flat tire.
BRAKE HUB
15. Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.