Table of Contents
Advertisement
Main Menu
Table of Contents
Fuses
Checking and Replacing Fuses
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
148
and
149
, or the diagram on the
fuse box lid, which fuse or fuses
control that device. The diagram for
the interior driver's side fuse box is
on the kick panel below the fuse box.
Check those fuses first, but check all
the fuses before deciding that a
blown fuse is the cause. Replace any
blown fuses, and check if the device
works.
1.
Turn the ignition switch to LOCK
(0). Make sure the headlights and
all other accessories are off.
2
Remove the cover from the fuse
box.
246
Taking Care of the Unexpected
BLOWN
3.
Check each of the large fuses in
the primary under-hood fuse box
by looking through the top at the
wire inside. Removing these fuses
requires a Phillips-head
screwdriver.
FUSE PULLER
4.
Check the smaller fuses in the
under-hood fuse boxes and all the
fuses in the interior fuse box by
pulling out each one with the fuse
puller provided in the primary
under-hood fuse box.
Advertisement
Chapters
Table of Contents
