Table of Contents
Advertisement
Main Menu
Table of Contents
Lights
3.
Install the new bulb into the
socket.
Insert the socket back into the
4.
headlight assembly. Turn it
clockwise to lock it in place.
Test the lights to make sure the
5.
new bulb is working.
216
Maintenance
Replacing Rear Bulbs
1.
Open the tailgate. Use a
screwdriver protected with a cloth
to pry open the two covers.
2.
Remove the two screws and
remove the rear light assembly
from the rear pillar.
3.
Determine which of the four bulbs
is burned out: brake/taillight, turn
signal/hazard lights, side marker
light, or back-up light.
4.
Remove the socket by turning it
one-quarter turn counterclockwise.
5.
Remove the burned-out bulb by
pulling it straight out of the socket.
Advertisement
Chapters
Table of Contents
