Point-To-Multipoint Bridge Configuration; Access Point Configuration - Cisco Aironet 1300 Series Hardware Installation Manual

Network Configuration Examples

Point-to-Multipoint Bridge Configuration

The point-to-multipoint bridge configuration
remote LAN networks. Wireless devices can also connect to the root bridge.
Figure 1-6

Access Point Configuration

When configured in access point mode, the unit can support remote workgroup bridges and local
wireless client devices (see
Figure 1-7
The access point configuration allows the wireless devices and the Ethernet-enabled wired devices using
the workgroup bridge to pass Ethernet traffic to and from the main LAN.
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
1-8
Point-to-Multipoint Bridge Configuration
Figure 1-7). The access point/bridge defaults to a root access point role.
Access Point Configuration
Access
point
(Figure 1-6) connects the main LAN network to multiple
Workgroup
bridge
Chapter 1 Overview
OL-5048-02