Using The Mode Button; Using The Web Browser Interface - Cisco Aironet 1240AG Series Hardware Installation Manual

Chapter 3 Troubleshooting 1240AG Series Autonomous Access Points

Using the MODE Button

Follow these steps to delete the current configuration and return all access point settings to the factory
defaults using the MODE button:
Disconnect power (the power jack for external power or the Ethernet cable for in-line power) from the
Step 1
access point.
Press and hold the MODE button while you reconnect power to the access point.
Step 2
Hold the MODE button until the Ethernet LED turns an amber color (approximately 2 to 3 seconds), and
Step 3
release the button.
After the access point reboots, you must reconfigure the access point by using the Web browser interface,
Step 4
the Telnet interface, or Cisco IOS commands.
Note

Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access point settings to the factory
defaults using the web browser interface.
Step 1 Open your Internet browser.
Note
Note
Enter the access point's IP address in the browser address line and press Enter. An Enter Network
Step 2
Password page displays.
Step 3 Enter your username in the User Name field.
Enter the access point password in the Password field and press Enter. The Summary Status page
Step 4
displays.
Click System Software and the System Software page displays.
Step 5
Click System Configuration and the System Configuration page displays.
Step 6
OL-8371-05
The access point is configured with the factory default values including the IP address (set to
receive an IP address using DHCP).
The access point web-browser interface is fully compatible with Microsoft Internet Explorer
version 6.0 on Windows 98 and 2000 platforms and with Netscape version 7.0 on Windows 98,
Windows 2000, and Solaris platforms.
When using the access point browser interface, you should disable your browser pop-up blocker.
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
Resetting to the Default Configuration
3-15