Access Points - Cisco Aironet 1240AG Series Hardware Installation Manual

Troubleshooting 1240AG Series Autonomous

Access Points

This chapter provides troubleshooting procedures for basic problems with the 1240AG series
autonomous access point (AIR-AP1242AG or AIR-AP1242G). For the most up-to-date, detailed
troubleshooting information, refer to the Cisco Technical Support and Documentation website at the
following URL:
http://www.cisco.com/en/US/products/hw/wireless/tsd_products_support_category_home.html
Sections in this chapter include:
Checking the Lightweight Access Point LEDs, page 3-2
•
Checking Basic Settings, page 3-3
•
Low Power Condition, page 3-5
•
Running the Carrier Busy Test, page 3-13
•
• Running the Ping Test, page 3-14
• Resetting to the Default Configuration, page 3-14
• Reloading the Access Point Image, page 3-16
• Obtaining the Access Point Image File, page 3-19
• Obtaining the TFTP Server Software, page 3-20
OL-8371-05
C H A P T E R
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
3
3-1