Figure; Chassis - Cisco Nexus 2000 Series Hardware Installation Manual

Cisco Nexus 2232TM-10GE, Cisco NexusN2K-C2232TM-E-10GE
is mounted in a standard 19-inch (48.26 cm) rack and supports vertical orientation. All of the switch
ports at the rear of the chassis are in close proximity to server ports, and all user-serviceable components
are accessible from the front panel.
You can order it with front-to-back or back-to-front air cooling, and AC or DC power supplies. If you
are going to install the chassis with its front end facing the cold aisle, you must order the chassis with
front-to-back airflow. If you are going to install the chassis with its back end facing the cold aisle, you
must order the chassis with back-to-front airflow.

Figure 1-18

location of components on the rear of the chassis. For information on what the chassis and component
LEDs indicate, see
Figure 1-18
1
1
Power supply
2 Fan tray
Cisco Nexus 2000 Series Hardware Installation Guide
1-22
shows the location of the components on the front of the chassis, and
Table D-1 on page
Front View of the Cisco Nexus 2232TM-10GE Chassis
2
3
Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
D-2.
4
3
Power supply
4 Status (top) and ID (bottom) LEDs
Figure 1-19 shows the
OL-19013-05