Sfp+ Transceivers; Sfp+ Copper Cables; Cisco Nexus 2148T - Cisco Nexus 2000 Series Hardware Installation Manual

Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch

SFP+ Transceivers

The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver is a bidirectional
device with a transmitter and receiver. It has a 20-pin connector on the electrical interface and duplex
LC connector on the optical interface. Currently, the Cisco Nexus 2224TP FEX supports the short-range
SFP and long-range SFP transceiver.
Nexus 2224TP FEX.
Table 1-20
Model
N2200 FET
SFP-10G-SR
SFP-10G-LR

SFP+ Copper Cables

Copper interface cables are available for use with the 10-Gigabit Ethernet SFP+ transceiver.
lists the available cables and provides a brief description of the cables.
Table 1-21
Model
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
SFP-H10GB-CU7MA
SFP-H10GB-CU10MA

Cisco Nexus 2148T

The Cisco Nexus 2148T FEX is a 1 RU device that acts as a remote I/O module on the Cisco Nexus 5000
Series switch. All device configurations are managed on the switch and configuration information is
downloaded through inband communication to the FEX. You can use this FEX with the Cisco Nexus
OL-19013-05
Table 1-20
SFP+ Transceivers Used with the Cisco Nexus 2224TP FEX
Description
10-Gigabit Ethernet for connections with a Cisco Nexus 5000 Series switch
10-Gigabit Ethernet—short range SFP+ module
10-Gigabit Ethernet—long range SFP+ module
Copper Cables Used with the Cisco Nexus 2224TP FEX
describes the SFP+ transceivers used with the Cisco
Description
10-Gigabit BASE-CU SFP+ Passive Cable
(1 meter)
10-Gigabit BASE-CU SFP+ Passive Cable
(3 meters)
10-Gigabit BASE-CU SFP+ Passive Cable
(5 meters)
10-Gigabit BASE-CU SFP+ Active Cable
(7 meters)
10-Gigabit BASE-CU SFP+ Active Cable
(10 meters)
Cisco Nexus 2000 Series Hardware Installation Guide
Cisco Nexus 2148T
Table 1-21
1-31