Cisco Nexus 2000 Series Hardware Installation Manual page 94

Installing the Cisco Nexus 2000 Series Fabric Extender Chassis in a Cabinet or Rack
S e n d d o c u m e n t c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
Figure 3-3
Stabilize the device in the rack by attaching the front rack-mount brackets to the front rack-mounting
Step 5
rails as follows:
Insert two screws (12-24 or 10-32, depending on the rack type) through the cage nuts and the holes
a.
in one of the front rack-mount brackets and into the threaded holes in the rack-mounting rail. See
Figure
b. Repeat for the front rack-mount bracket on the other side of the device.
Figure 3-4
Cisco Nexus 2000 Series Hardware Installation Guide
3-8
Sliding the Chassis Into the Rack
1
2
3-4.
Attaching the Device to the Rack
Chapter 3 Installing a Cisco Nexus 2000 Series Fabric Extender
1
OL-19013-05