Sfp+ Copper Transceiver Specifications; Airflow Optimization Accessories - Cisco Nexus 2000 Series Hardware Installation Manual

Appendix B Technical Specifications
2. Functional performance is not intended, device reliability is not

SFP+ Copper Transceiver Specifications

This section provides the general and environmental specifications for the SFP+ transceivers used with
copper cables.
For the cable specifications that apply to SFP+ copper transceivers, see
Table B-6
Transceiver
SFP-H10GB-CU7M
SFP-H10GB-CU10M

Airflow Optimization Accessories

This section describes the airflow optimization accessories for the Cisco Nexus 2000 Series FEX.
For the details of the Cisco Nexus airflow extension sleeve and the Cisco Nexus airflow vent, see
Table
Table B-7
Accessories
PID
Name
Description
Compatibility
Dimensions
(height x width x depth)
Weight
OL-19013-05
implied, and damage to the device may occur over an extended period
of time between absolute maximum ratings and the recommended
operating conditions.
Cable Specifications for the 10-Gbps SFP+ Copper Transceivers
B-7.
Airflow Optimization Accessories
Airflow Extension Sleeve
NXA-AIRFLOW-SLV
Cisco Nexus Airflow Extension
Sleeve.
Optimizes airflow in front-to-back
airflow deployments (port side
exhaust) for alignment of port in
back of rack and extension of power
supply side of chassis to front of
rack with airflow sleeve
Nexus 2200 chassis
1.72" (1RU) x 17.3" x 8.5"(fully
retracted)* or 12.9"(fully
extended)*
Adjustable depth for the FEX,
between 26 and 30 inches
5.7 lbs or 2.6 kg
Airflow Optimization Accessories
Table
Cable Length
23.0 feet (7 meters)
32.8 feet (10 meters)
Airflow Vent
NXA-ACC-KIT-BAV
Cisco Nexus Airflow Vent.
Optimizes airflow in back-to-front
top of rack deployments (port side
intake). Airflow vent consists of
metallic cover to place on the
upper exhaust of the FEX port side
and mounting rails with snap on
holes for airflow vent.
Nexus 2200 chassis
Vent cover is part of the mounting
hardware kit and its size is
meaningless to overall form factor
of the chassis: 0.42" x 17.53" x
2.56"
0.42 lbs or 0.19 kg
Cisco Nexus 2000 Series Hardware Installation Guide
B-6.
B-7