Verifying The Phone Startup Process - Cisco 7970 Setting Up

Chapter 3 Setting Up the Cisco IP Phone

Verifying the Phone Startup Process

OL-4314-01
Figure 3-2 Parts Used in Wall Mounting the Cisco IP Phone
1 Footstand adjustment knob—Raises and lowers adjustment plate
2
Wall mounting screw holes
3 Adjustment plate—Raises and lowers phone vertically
After the Cisco IP Phone has power connected to it, the phone begins its startup
process by cycling through a variety of steps and messages. Then the main LCD
screen displays:
Current date and time
•
Primary directory number
•
Additional directory numbers and speed dial numbers, if configured
•
• Softkeys
Cisco IP Phone 7970 Administration Guide for Cisco CallManager 3.3
Verifying the Phone Startup Process
3-13