MS-7031 Micro ATX Mainboard
USB Controller
Select [Enabled] if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals. Setting options: [Disabled], [Enabled].
USB 2.0 Controller
Set to [Enabled] if you need to use any USB 2.0 device in the operating system that
does not support or have any USB 2.0 driver installed, such as DOS and SCO Unix.
Setting options: [Disabled], [Enabled].
USB Keyboard/Mouse Support
Select [Enabled] if you need to use a USB-interfaced keyboard/mouse in the operat-
ing system. Setting options: [Disabled], [Enabled].
AC97 Audio
[Auto] allows the mainboard to detect whether an audio device is used. If an audio
device is detected, the onboard AC'97 (Audio Codec'97) controller will be enabled; if
not, it is disabled. Disable the controller if you want to use other controller cards to
connect an audio device. The settings are: [Auto], [Disabled].
Onboard LAN Controller
This setting controls the onboard LAN controller. Setting options: [Enabled], [Disabled].
OnBoard 1394 Controller
This item allows you to enable/disable the onboard IEEE1394 controller. The settings
are: [Enabled], [Disabled].
Init Display First
This setting specifies which VGA card is your primary graphics adapter. Setting
options are:
[OnChip VGA/AGP] The system initializes the onboard VGA device.
[PCI Slot]
3-12
Integrated Peripherals
The system initializes the installed PCI VGA card first. If a
PCI VGA card is not available, it will initialize the onboard
VGA device.