Planet WGSW-28040 User Manual page 24

■ 1000Base-SX/LX SFP interfaces (shared with Port-25 to Port-28)
LED Color
LNK/ACT Green
1000 Green
WGSW-28040P LED indication
■ System
LED Color
PWR
Green
SYS
Green
■ 10/100/1000Base-T interfaces
LED Color
LNK/ACT Green
PoE In-Use Orange
■ 1000Base-SX/LX SFP interfaces (shared with Port-25 to Port-28)
LED Color
LNK/ACT Green
1000 Green
If LNK/ACT LED light-> indicate that the port is operating at 10/100Mbps
Off:
If LNK/ACT LED Off -> indicate that the port is link down
To indicate the link through that port is successfully established.
Lights:
To indicate that the switch is actively sending or receiving data over that port.
Blink:
indicate that the port is operating at 1000Mbps.
Lights:
If LNK/ACT LED light-> indicate that the port is operating at 100Mbps
Off:
If LNK/ACT LED Off -> indicate that the port is link down
Figure 2-4 WGSW-28040P LED panel
Lights to indicate that the Switch has power.
Lights to indicate the system is working.
To indicate the link through that port is successfully established.
Lights:
To indicate that the switch is actively sending or receiving data over that port.
Blink:
To indicate the port is providing 48VDC in-line power.
Lights:
To indicate the connected device is not a PoE Powered Device (PD)
Off:
To indicate the link through that port is successfully established.
Lights:
To indicate that the switch is actively sending or receiving data over that port.
Blink:
indicate that the port is operating at 1000Mbps.
Lights:
User's Manual of WGSW-28040 / 28040P
Function
Function
Function
Function
24