Planet WGSW-28040 User Manual page 174

The page includes the following fields:
Object
• System PoE Admin
Mode
• Power Limit Mode
• PoE Temperature Unit
1
• PoE Temperature Unit
2
• Power Allocation
•
Port
• PoE Function
•
Device Class
•
Current [mA]
•
Consumption [W]
Buttons
: Click to save changes.
Description
Allows user enable or disable PoE function. It will causes all of PoE ports supply
or not supply power.
There are five modes for configuring how the ports/PDs may reserve power and
when to shut down ports.
Consumption mode
The default PoE management mode is "Consumption mode".
Display the current operating temperature of PoE chip unit 1.
The unit 1 is in charge of PoE Port-1~Port-12
Display the current operating temperature of PoE chip unit 2.
The unit 1 is in charge of PoE Port-13~Port-24
Show the total watts usage of PoE Switch.
This is the logical port number for this row.
There are two modes for PoE mode.
Enable: enable PoE function..
Disable: disable PoE function.
Display the class of the PD attached to the port, as established by the
classification process.
Class 0 is the default for PDs. The PD is classified based on power. The
classification of the PD is the maximum power that the PD will draw across all
input voltages and operational modes. A PD shall return Class 0 to 3 in
accordance with the maximum power draw as specified by
ampere
Shows how much
Shows how much power the PD currently is using.
174
User's Manual of WGSW-28040 / 28040P
the PD currently is using.
Table 4-13-1.