Planet WGSW-28040 User Manual page 18

Multicast
Supports IGMP Snooping v1, v2 and v3
Querier mode support
IGMP Snooping v2 fast leave
Unknown Multicast drop
Security
Storm Control support
− Broadcast / Multicast / Unknown-Unicast / Unknown-Multicast
Authentication
− IEEE 802.1X Port-Based network access authentication
− Built-in RADIUS client to co-operate with the RADIUS servers
Access Control List
− IP-Based ACL
− MAC-Based ACL
MAC Security
− Static MAC
− Source / Destination MAC Filtering
− Port Security for Source MAC address entries filtering
Management
Switch Management Interfaces
- Console / Telnet Command Line Interface
- IPv4 and IPv6 Web switch management
- SNMP v1, v2c switch management
- SSH / SSL secure access
Four RMON groups (history, statistics, alarms, and events)
SNMP trap for interface Link Up and Link Down notification
SNTP (Simple Network Time Protocol)
Built-in Trivial File Transfer Protocol (TFTP) client
BOOTP and DHCP for IP address assignment
Firmware upload/download via HTTP / TFTP
Event message logging to remote Syslog server
Reset button for system reboot or reset to factory default
User's Manual of WGSW-28040 / 28040P
18