Interface - Epson EB-Z8050W User Manual

Part Names and Functions

Interface

The following ports can be accessed by removing the interface cover.
For information on how to remove the interface cover and connect
video equipment, Quick Start Guide .
s
Name
A
HDMI input port Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
B
For analog RGB signals from a computer and
BNC input port
component video signals from other video sources.
s Quick Start Guide
C
Video input port For composite video signals from video sources.
s Quick Start Guide
D
For S-video signals from video sources. s Quick Start
S-Video input port
Guide
Function
g
signals. s Quick Start Guide
Name
E
Cable holder Connection may become defective when a thick heavy
HDMI cable is connected to the HDMI input port. Run
a commercially available cable tie through this holder to
prevent the cable from disconnecting.
F
For analog RGB signals from a computer and
Computer input port
component video signals from other video sources.
s Quick Start Guide
G
Power inlet Connects to the power cable. s Quick Start Guide
H
Remote port Connects the optional remote control cable set and
inputs signals from the remote control. When the
remote control cable is plugged into this port, the
remote receiver on the projector is disabled.
I
When controlling the projector from a computer,
RS-232C port
connect it to the computer with an RS-232C cable. This
port is for control use and should not normally be used.
p.111
s
J
Connects to the optional wireless LAN unit.
Wireless LAN Unit
port (EB-Z8050W only)
K
Outputs to an external monitor the analog signal from
Monitor Out port
the computer connected to the Computer input port or
the BNC input port. This is not available for component
video signals or other signals being input to any port
other than the Computer input port or the BNC input
port. s
L
Connects to a LAN cable and then to a network.
LAN port
p.105
(EB-Z8000WU only) s
M
DVI-D input port Inputs digital RGB signals from a computer connected
to the DVI-D output port. This projector is compatible
with HDCP
N
Connects to a LAN cable and then to a network.
LAN Port
p.105
(EB-Z8050W only) s
Function
p.106
g
signals. s Quick Start Guide
11