Setting The Auto Iris; Hiding The Image Temporarily (Shutter); Freezing The Image (Freeze) - Epson EB-Z8050W User Manual

Functions for Enhancing Projection

Setting the Auto Iris

By automatically setting the luminance according to the brightness of
the displayed image, it lets you enjoy deep and rich images.
Procedure
A
Press the [Menu] button, and select Image - Auto Iris from
the configuration menu.
Using the Remote Control
B
Select On.
The setting is stored for each Color Mode.
C
Press the [Menu] button to close the configuration menu.
• Auto Iris can be set only when the Color Mode is Dynamic,
q
Theatre, or Customized.
• When Multi-screen is set to On, Auto Iris does not work.

Hiding the Image Temporarily (Shutter)

You can use this when you want to focus the audience's attention on
what you are saying, or if you do not want to show details such as
when you are changing between files during presentations from a computer.
"Using the Configuration Menu"
s
Using the Control panel
Procedure
Using the Remote Control
Each time you press the buttons, the electric shutter closes or opens.
• When the shutter is closed and no operations are performed for
q
about 120 minutes, the projector enters Sleep Mode and turns
off automatically. If you do not want Sleep Mode to activate,
change the Shutter Timer setting to Off from Operation in the
Extended menu. s
• If you press [t] button while the shutter is closed, the shutter
automatically opens and a message requesting confirmation to
turn off the power is displayed on the screen.

Freezing the Image (Freeze)

When the moving image on the screen is frozen, the image continues
to project, so you can project a moving image one frame at a time like
Using the Control panel
p.49
24