Setting The Projector Id; Checking The Projector Id - Epson EB-Z8050W User Manual

Limitation of the Number of the Target Projectors when Using Multiple Projectors

Setting the Projector ID

Procedure
A
During projection, press the [Menu] button and select
Extended - "Projector ID" from the configuration menu.
"Using the Configuration Menu"
s
Using the Remote Control
B
Choose the ID you want to set and press the [Enter] button.
C
Press the [Menu] button to close the configuration menu.
Using the Control panel

Checking the Projector ID

Use the following procedure to check the projector ID.
Procedure
A
Set the remote control ID switch to On.
B
During projection, while holding the [ID] button, press the
[Help] button.
Remote Control
When you press the buttons, the current Projector ID is displayed
on the projection screen. It disappears in about three seconds.
33