Epson EB-Z8050W User Manual page 19

Correcting Distortion in the Projected Image
D
To adjust the shape, use the [
control or the [ /
w
the control panel.
If the triangle in the direction you are adjusting the shape turns
gray, as shown in the screenshot below, you cannot adjust the
shape any further in that direction.
] button on the remote
h
], [ / ], [ / ], and [ / ] buttons on
v < >
E
Repeat procedures 3 and 4 as needed to adjust any
remaining corners.
F
When you are done, press the [Esc] button to exit the
correction menu.
Because the correction method was changed to Quick Corner
from Keystone in the configuration menu, when [
[ / ], and [ / ] buttons are pressed later, the screen for
< >
selecting the corner in procedure 2 is displayed. Change Keystone
from the configuration menu to H/V-Keystone if you want to
correct H/V-Keystone when pressing the [
and [ / ] buttons on the control panel.
>
19
/ ], [ / ],
w v
/ ], [ / ], [ / ],
w v <