Table of Contents
Advertisement
3. Go out through the entry/exit door. The system will be armed in Away mode. If
NOTE: Pressing
you must enter a valid [access code]. See Turning Off Your System on page
8.
Turning On
If you want to turn on the system, and no one else will be entering, you can
Your System
remove the entry delay time from zones that normally have one. If somebody
enters through any zone, the system will sound an instant alarm.
with No Entry
Delay Time
1. Check that your system is ready (green Ready light is ON)
2. Press
3. The system is now armed in Stay mode.
Turning On
Your installer may have set up your system to turn on at a pre-set time. If auto-
Your System
matic arming has been set up, when the system reaches the pre-set auto-arm
time, the keypad buzzers will sound for one minute.
Automatically
(Automatic
During this one-minute warning time, you may be able to stop automatic arming
Arming)
by entering your [access code]. Ask your installer for more information.
Your installer may have set up the system so that users with a master code can
change the auto-arm time at the keypad. If so, master users will be able to turn
the automatic arming function on or off, and program the time at which the sys-
tem will automatically turn on each day.
To turn automatic arming (auto-arm) on or off:
1. Press
2. Press
3. When you are finished, press
To change the auto-arm time:
1. Press
2. Press
3. Press
5. When you are finished, press
NOTE: The system must have the correct time and date in order for the
auto-arm feature to work. See Setting the Time and Date on page 20.
you do not exit, the system will be armed in Stay mode.
0
, then your [access code].
9
• The red (Armed) light flashes as a reminder that the system is on and has
no entry delay time.
• The keypad sounds 3 fast beeps.
, then [master code].
6
to turn automatic arming on or off. The keypad will beep 3 times
2
when auto-arm is turned ON, and will beep one long tone when it is turned
OFF.
, then [master code].
6
.
3
to
to select the day you wish to program (Sunday -Saturday).
1
7
Enter the auto-arm time using the 24 Hr format (0000 - 2359). For example, to
set the time for 1:00pm, enter (1300).
T u r n i n g Y o u r S ys te m O n ( A rm i n g ) a n d O f f ( Di s a rm i n g )
will only turn on the system. To turn the system off,
.
#
twice.
#
11
Advertisement
Table of Contents
