Table of Contents
Advertisement
Chapter 4 Award BIOS Setup
1. USB 1.0 CONTROLLER
This should be enabled if your system has a USB installed on the
system board and you want to use it. Even when so equipped, if you
add a higher performance controller, you will need to disable this
feature.
2. USB 2.0 CONTROLLER
Enable the USB 2.0 controller.
3. USB KEYBOARD FUNCTION
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.
4. USB MOUSE FUNCTION
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB Mouse.
5. USB STORAGE FUNCTION
Enable the USB Storage Function
6. USB FLASH DISK 2.00
Select USB Flash Disk Type.
ONBOARD LAN 1/2 CONTROLLER:
Enable the LAN controller.
Page: 4-18
PMB-601LF USER
'
S MANUAL
Advertisement
Table of Contents
