Vga Driver Utility - Intel PMB-601LF User Manual

3-2. VGA DRIVER UTILITY

The VGA interface embedded with our PMB-601LF can support a wide
range of display. You can display CRT, PCI-E (SDVO) simultaneously
with the same mode.
3-2-1. Installation of VGA Driver:
To install the VGA Driver, simply follow the following steps:
1. Place insert the Utility Disk into Floppy Disk Drive A/B or CD
ROM drive.
2. Under Windows 2000/XP/2003 system, go to the directory where
VGA driver is located.
3. Click Setup.exe file for VGA driver installation.
4. Follow the instructions on the screen to complete the installation.
5. Once installation is completed, shut down the system and restart in
order for the changes to take effect.
PMB-601LF USER
'
S MANUAL
Chapter 3 Software Configuration
Page:3-3