miniDSP Dirac DDRC-22A User Manual page 30

The Dirac Series audio processor can hold up to four filter sets in its internal memory. Filter sets are managed
with a "drag and drop" metaphor:
 To load the most recently generated filter set into the processor, drag the box at the top left (labeled "Auto
target" in the example) and drop it onto an empty slot.
 To remove a filter set, click on its name (oriented vertically at the left), drag it from the slot and drop it on the
trashcan icon at the top right.
 To load a filter set into a slot that already has filters loaded, first delete the loaded filter set by dragging it
onto the trashcan icon. Then drag and drop the current filter set onto the now-empty slot.
There are two ways of generating different filter sets to load into the processor:
 Return to the Filter Design screen, change your target curve, and click on Optimize again. Then proceed to
the Export screen and drag and drop the new filter set onto an empty slot.
 Load another project. Its most recently generated filter set can then be dropped onto an empty slot.
Here is an example screen with three loaded filter sets and with Dirac Live® filtering enabled:
miniDSP Ltd – Hong Kong / Email : info@minidsp.com / Features and specifications subject to change without prior notice
30