Sound System Tab; Mic Config Tab - miniDSP Dirac DDRC-22A User Manual

3.3.1 Sound System tab

The Sound System tab is preset for you, provided that you have your Dirac Series audio processor and UMIK-1
connected to the computer via USB.
Choose system configuration
Preset to Stereo Speaker System. This is the only configuration supported by current Dirac
Series processors.
Test signal playback device
Preset to DDRC-22 (miniDSP Ltd). This will ensure that test signals are sent into your audio
system via the Dirac Series processor. (If this is not present, check that your Dirac Series
processor is connected via USB and powered on, and click the Rescan button.)
Once you have verified that this screen is correct, click the Proceed button.

3.3.2 Mic Config tab

On the Mic Config tab, set the following parameters.
Recording device
Preset to the UMIK-1. (If this is not present, ensure that
the UMIK-1 is connected securely to the computer via
USB, and go back to the Sound System tab and click on
Rescan. Then select the "Microphone" item underneath
"UMIK-1", as shown at right.)
Recording channel
Select 1 from the drop-down menu.
miniDSP Ltd – Hong Kong / Email : info@minidsp.com / Features and specifications subject to change without prior notice
18