Intel TE430VX Technical Product Specification page 35

1.15.4.6 Battery Marking
There is insufficient space on this board product to provide the required replacement and disposal
instructions for the battery. The following marking must be placed permanently and legibly on the
host system as near as possible to the battery:
CAUTION
Danger of explosion if battery is incorrectly replaced
Replace with only the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer's instructions.
1.15.4.7 Overload Protection:
Unless the power supply is provided with inherent overcurrent protection, use caution to avoid
overloading the power supply output. This can be accomplished by assuring that the calculated
total current load of all the modules within the system is less than the output current rating of the
power supply. Failure to accomplish this could result in overheating in the power supply, which
could result in a fire or could cause damage to insulation separating hazardous AC line circuitry
from low-voltage user accessible circuitry. If the load drawn by a particular module cannot be
determined by the markings and instructions supplied with the module, contact the module
supplier's technical support organization.
Motherboard Description
35