Error Messages And Beep Codes; Bios Beep Codes; Pci Configuration Error Messages - Intel TE430VX Technical Product Specification

4 Error Messages and Beep Codes

4.1 BIOS Beep Codes

Beeps Error Message
1 Refresh Failure
2 Parity Error
3 Base 64 KB Memory Failure
4 Timer Not Operational
5 Processor Error
6 8042 - Gate A20 Failure
7 Processor Exception Interrupt Error
8 Display Memory Read/Write Error
9 ROM Checksum Error
10 CMOS Shutdown Register Rd/Wrt
Error
11 Cache Error/ External Cache Bad

4.2 PCI Configuration Error Messages

The following PCI messages are displayed as a group with bus, device and function information.
<'NVRAM Checksum Error, NVRAM Cleared'>, \ ; String
<'System Board Device Resource Conflict'>, \ ; String
<'Primary Output Device Not Found'>, \ ; String
<'Primary Input Device Not Found'>, \ ; String
<'Primary Boot Device Not Found'>, \ ; String
<'NVRAM Cleared By Jumper'>, \ ; String
<'NVRAM Data Invalid, NVRAM Cleared'>, \ ; String
<'Static Device Resource Conflict'>, \ ; String
The following messages chain together to give a message such as:
PCI I/O Port Conflict: Bus: 00, Device 0D, Function: 01
Description
The memory refresh circuitry on the motherboard is
faulty.
Parity is not supported on this product, will not occur.
Memory failure in the first 64 KB.
Memory failure in the first 64 KB of memory, or Timer 1
on the motherboard is not functioning.
The CPU on the motherboard generated an error.
The keyboard controller (8042) may be bad. The BIOS
cannot switch to protected mode.
The CPU generated an exception interrupt.
The system video adapter is either missing or its
memory is faulty. This is not a fatal error.
ROM checksum value does not match the value
encoded in BIOS.
The shutdown register for CMOS RAM failed.
The external cache is faulty.
59