TE430VX Motherboard Technical Product Specification
1.11.5
CPU Voltage (J6M1)
This jumper block changes the output of the on-board voltage regulator. Pins 2-3 should be
jumpered for processors that require standard voltage regulation, pins 1-2 should be jumpered for
processors that require the VRE specification. This jumper should not be changed by the user
unless changing to a new processor type. Some upgrade processors may require a different setting,
check the processor's documentation for the correct setting. (Standard = 3.135-3.63V,
VRE = 3.465-3.63V)
1.11.6
BIOS Recovery (J7A1)
This jumper allows the BIOS to be recovered if it has been corrupted by moving the jumper from
the 1-2 position to the 2-3 position and inserting a recovery diskette. Default setting is for normal
operation (1-2 position).
1.12 Reliability
The Mean-Time-Between-Failures (MTBF) data is calculated from predicted data @ 55C.
Motherboard
1.13 Environmental
Table 4.
Motherboard Environmental Specifications
Parameter
Temperature
Non-Operating
Operating
DC Voltage
+5 V
-5 V
+12 V
-12 V
+3.3 V
Vibration
Unpackaged
Packaged
30
80,798 hours
Specification
o
o
-40
C to +70
C
o
o
+0
C to +55
C
±5 %
±5 %
±5 %
±5 %
±5 %
5 Hz to 20 Hz : 0.01g² Hz sloping up to 0.02 g² Hz
20 Hz to 500 Hz : 0.02g² Hz (flat)
10 Hz to 40 Hz : 0.015g² Hz (flat)
40 Hz to 500 Hz : 0.015g² Hz sloping down to 0.00015 g² Hz