Placing Calls Using Speed Dial - Polycom VVX 1500 D User Manual

User Guide for the Polycom VVX 1500 D Phone
Note

Placing Calls Using Speed Dial

Note
3 - 10
Your system administrator sets up your phone to automatically place the call after
you enter a certain number of digits. If your phone does not automatically place the
call after you enter a phone number, tap the Send soft key.
or
— Enter the phone number, tap the Dial soft key, and then press
.
Dialing URLs or IP Addresses Using the Headset
To dial a URL or IP address using the headset:
1. Tap the New Call soft key or the Line Key to obtain a dial tone.
2. Press .
3. Tap the URL soft key.
4. Enter the URL or IP address. (See
page 1-25.)
5. Tap the Send soft key.
A contact may not have a speed dial number. To find out what a contact's speed dial
index number is, or to assign or update a speed dial index number, see
Contacts in Your Local Contact Directory
You can quickly "speed dial" a contact by doing one of the following:
• Tapping the contact's Speed Dial Key.
Not all contacts have a Speed Dial Key. For information on
Speed Dial Keys, see
• Accessing the Speed Dial Information screen.
To place a call to a contact using speed dial:
Do one of the following:
>>
— Tap the contact's Speed Dial Key.
Entering Data and Editing Fields
on page 2-58.
Managing Speed Dial Keys
on
Updating
on page 3-40.