Placing Calls Using The Headset - Polycom VVX 1500 D User Manual

Note

Placing Calls Using the Headset

Note
Dialing Numbers Using the Speakerphone
To dial a number using the speakerphone:
With the handset on-hook, do one of the following:
>>
— Tap the New Call soft key or the Line Key, or press
a dial tone. Then, enter the phone number.
Your system administrator sets up your phone to automatically place the call after
you enter a certain number of digits. If your phone does not automatically place the
call after you enter a phone number, tap the Send soft key.
or
— Enter the phone number, and then tap the Dial soft key or the
Line Key, or press
Dialing URLs or IP Addresses Using the Speakerphone
To dial a URL or IP address using the speakerphone:
1. Tap the New Call soft key or the Line Key, or press
2. Tap the URL soft key.
3. Enter the URL or IP address. (See
page 1-25.)
4. Tap the Send soft key.
To permanently enable your headset, see
page 2-7.
Dialing Numbers Using the Headset
To dial a number using the headset:
With the optional headset connected, do one of the following:
>>
— Tap the New Call soft key or the Line Key to obtain a dial tone. Then,
press
.
Entering Data and Editing Fields
Enabling Headset Memory Mode
, and then enter the phone number.
Using the Basic Features of Your Phone
to obtain
.
on
on
3 - 9